Description
Description
Powermatic 60C 8 Inch Jointer 2HP 1PH 230V (PM9-1610084K)
This 8″ Jointer meets the demand for accuracy while combining unique, user-friendly functions. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel. The tables provide 73” long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The jointer is available with a three high speed steel knife cutterhead, or a helical cutterhead with 54 four-sided knife inserts. The operating switch is high mounted for easy reach, and the push blocks have a magnetic base – store them on any metallic surface for instant access.
FEATURES
- Adjustment lever offers quick infeed table positioning and fine-tuning of cut depth
- Extra long tables are mounted on dovetailed ways for extended workpiece support
- Handwheel operated worm gear system for smooth fence tilting
- High mount switch for operator convenience
- Magnetic push blocks can be stored on the machine within constant reach
- Non-mar fence insert protects table surface
- Three straight high-speed steel knives give a clean cut
- NOTE: The recommended max cutting depth for non-rabbeting cuts is 1/8”. The max cutting depth for rabbeting cuts is 1/2″ as the manual has always stated.
SPECS
- Type of Cutterhead: Straight Knife
- Cutterhead Diameter (In.):3
- Maximum Cutting Depth (In.):1/8
- Cuts Per Minute:21,000
- Cutterhead Speed (RPM):7000.0000
- Cutting Capacity (W x D) (In.):8 x 1/2
- Dust Collection Minimum CFM Required (CFM):600
- Dust Port Outside Diameter (In.):4
- Fence Tilt (Deg.):90 to 45 R
- Infeed Table Length (In.):35-1/4
- Number of Knives:3
- Motor Power (HP):2
- Motor Voltage (V.):230
- Prewired Voltage (V.):230
- Motor Phase: 1
- Recommended Circuit Size (Amps.):20
- Motor Amps:9
- Max.Rabbeting Capacity (In.):1/2
View AllClose