Description
Specifications
| Function |
Entrance – ANSI F08, F10
Latch by knob either side except when outside locked
by stop button; then by key outside, knob inside.
Deadbolt by key outside, turn-piece inside. Deadbolt
deadlocks latch |
| Thru Bolts |
Thru-bolted knob/plate assemblies integrate and align with lock body. |
| Standard Finish |
US 26D – Satin Chrome |
| Handing |
Left Handed |
| Exterior |
Satin Chrome, screw-less round knob, 2-1/4″ diameter on steel reinforced brass plate, 10″ x 2-3/4″. Two thru posts pass thru lock body. Integral spring-loaded 9/32″ spindle. |
| Interior |
Satin Chrome, screw-less round knob, 2-1/4″ diameter on steel reinforced brass plate, 7″ x 2-1/4″. Exposed 8-32 mounting. Bolts engage outside plate assembly. Integral spring loaded 9/32″ spindle. |
| Cylinder |
5-pin cylinder, 1-1/8″ long |
| Strike |
Conforms to ANSI spec.A115.1, 4-7/8″ x 1-1/4″ x 3/32″ thick, 5/8″ curved lip |
| Door Thickness |
1-1/4″ to 1-3/4″ |
| Backset |
2-1/2″ |
| Lock Front |
7-5/8″ x 1-1/16″ |
| Deadbolt |
Cast brass, 1″ throw |
| Latch |
Solid brass, 1/2″ throw, reversible |
| Rocker Switch |
Locks or unlocks hub |
| Hubs |
9/32″ on square with steel security separator |
| Hub Lock Arm |
Steel, .125″ thick |
| Case |
High pressure cast Zamac, baked enamel finish |
Downloads
- Installation Instructions
Return Policy: We do not accept returns on unsealed products. In order to return a defective item a support ticket is needed. To receive a ticket, please contact Marks USA directly at 1-800-645-9445or visit their support page here. Once you have the ticket contact UHS Hardware for the return.