Dewalt 1/2 in. to 2 in. Knockout Punches and Dies Kit – DCE6002K

Product Features & specs :

Dewalt DCE6002K 1/2 in. to 2 in. Knockout Punches and Dies Kit

Cleanly knockout conduit holes with the DEWALT DCE6002K 1/2 in. – 2 in. Knockout Punches and Dies Kit. The DCE600 knockout dies contain embedded magnets which attach to mild steel, to maximize precision in punch alignment. Punches and dies include laser etched markings to easily distinguish between sizes. Punches split slugs ranging from 1/2 in. – 2 in., allowing ease of use in disassembling the system once the knockout is completed. Keep everything organized with the included TOUGHSYSTEM 2.0 Tool Box. The punches and dies are designed for use with the DEWALT DCE600 20V MAX Hydraulic Knockout Tool (sold separately).

• Punches up to 10 gauge mild steel and 12 gauge stainless steel

• Embedded magnets in dies for precise punch setup

• Crosshairs on dies for convenient punch alignment

• Punches thread onto draw stud (sold separately) for punch and die setup

• TOUGHSYSTEM 2.0 for durable component storage

• 1/2 in. to 2 in. Knockout Punches and Dies Kit – DCE6002K

• 1/2 in. Knockout Die – DCE600012D

• 1-1/2 in. Knockout Punch – DCE600112P

• 2 in. Knockout Die – DCE600200D

• 2 in. Knockout Punch – DCE600200P

• 1/2 in. Knockout Punch – DCE600012P

• 3/4 in. Knockout Die – DCE600034D

• 3/4 in. Knockout Punch – DCE600034P

• 1 in. Knockout Die – DCE600100D

• 1 in. Knockout Punch – DCE600100P

• 1-1/4 in. Knockout Die – DCE600114D

• 1-1/4 in. Knockout Punch – DCE600114P

• 1-1/2 in. Knockout Die – DCE600112D

• TOUGHSYSTEM 2.0 Case