Description
| Door Height: |
7′ foot [2133.6mm] |
| Header Bolt: |
Hexagonal 3/8″ [9.5 mm] flat to flat. Made of stainless steel. |
| Adjustment: |
Exact adjustment of threaded rod to door height is locked in place by hexagonal header bolt. |
| Strike: |
For header bolt, a 1/2″ [12.7 mm] diameter hole in metal frame is suitable. For non-metal installation, 4005 Strike is available separately. |
| Standard Package: |
Packed separately with bolt guide, screws, and attachment pin. |
Security for pairs of doors with single key turn is possible with the 4016 Header Bolt. The two-point locking solution secures the entire double door entrance when working in conjunction with an MS® Deadlock. Adding the 4016 Header Bolt to a pivoted bolt MS® deadlock provides Maximum Security for pairs of doors with the turn of a single key. Simultaneously extending the stainless steel hexbolts into the header and pivoting the massive MS® bolt into the mating door’s stile, the two-point locking solution secures the entire entrance. The 4016 Header Bolt can be added to any basic MS1850S, MS1850SN, MS1950 Series deadlock or for two-points top and bottom use with 1870/1870HM Cylinder-Operated Flushbolt. Not applicable to 7/8″ backset locks.
Both the 4016 Header Bolt and the 4015 Threshold Bolt (sold separately) may be added to a pivoted bolt MS® deadlock to provide Maximum Security for pairs of doors by the turn of a single key. Simultaneously extending the stainless steel hexbolts into the header and threshold and pivoting the massive MS® bolt into the mating door’s stile, thereby providing a three-point locking solution. 360° turn of key or thumbturn in basic MS® deadlock throws counterbalanced bolt into opposite door and hexagonal bolt into header. Key can be removed only when bolts are in a positively locked or unlocked position.
Downloads
- Installation Instructions
- Catalog Page